MKR WiFi 1010

The easiest entry point to basic IoT and pico-network application design.

Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a Bluetooth® Low Energy device sending data to a cellphone, the MKR WiFi 1010 is your one-stop-solution for many of the basic IoT application scenarios.

GET STARTED

DATASHEET

Main Features

The MKR WiFi 1010 is a great choice for any beginner, maker or professional to get started with Internet of Things (IoT). Using the popular Arm® Cortex®-M0 32-bit SAMD21 processor, it also features the and the ECC508 crypto-chip for security. The board is part of the MKR family, where you can choose from a large variety of shields to build projects out of the box with minimal effort!

Bluetooth®

Enables Bluetooth® allowing you to implement Bluetooth® in your projects.

Documentation

library

WiFi

Enables WiFi allowing you to connect wirelessly to your peripherals.

Documentation

library

Tech Specs

Here you will find the technical specifications for the Arduino MKR WiFi 1010.

Please read: operating voltage is 3.3V

The microcontroller on the this board runs at 3.3V, which means that you must never apply more than 3.3V to its Digital and Analog pins. Care must be taken when connecting sensors and actuators to assure that this limit of 3.3V is never exceeded. Connecting higher voltage signals, like the 5V commonly used with the other Arduino boards, will damage the board.

Please read: black conductive foam

You should remove the black conductive foam from the board pins before usage. If you don't remove it, the board may behave erratically.

Board	Name	Arduino® MKR WiFi 1010
	SKU	ABX00023
	Compatibility	MKR
Microcontroller	SAMD21 Cortex®-M0+ 32bit low power ARM MCU
USB connector	Micro USB (USB-B)
Pins	Built-in LED Pin	6
	Digital I/O Pins	8
	Analog Input Pins	7 (ADC 8/10/12 bit)
	Analog Output Pins	1 (DAC 10 bit)
	PMW Pins	13 (0 - 8, 10, 12, A3, A4)
	External interrupts	10 (0, 1, 4, 5, 6, 7, 8 ,9, A1, A2)
Connectivity	Bluetooth®	Nina W102 uBlox module
	Wi-Fi	Nina W102 uBlox module
	Secure element	ATECC508A
Communication	UART	Yes
	I2C	Yes
	SPI	Yes
Power	I/O Voltage	3.3V
	Input Voltage (nominal)	5-7V
	DC Current per I/O pin	7 mA
	Supported battery	Li-Po Single Cell, 3.7V, 1024mAh Minimum
	Battery connector	JST PH
Clock speed	Processor	48 MHz
Clock speed	RTC	32.768 kHz
Memory	SAMD21G18A	256KB Flash, 32KB SRAM
Memory	Nina W102 uBlox module	448 KB ROM, 520KB SRAM, 2MB Flash
Dimensions	Weight	32 g
	Width	25 mm
	Length	61.5 mm

Compatibility

Software & Cloud

The following software tools allow you to program your board both online and offline.

Hardware

The hardware listed below is compatible with this product.

shields

carriers

MKR Connector Carrier

MKR IoT Carrier

MKR Motor Carrier

Essentials

First Steps

Quickstart Guide

All you need to know to get started with your new Arduino board.

Updating the NINA Firmware

Learn how to update the firmware and load certificates to your u-blox NINA Wi-Fi based board.

Suggested Libraries

WiFiNINA

The WiFiNINA library is designed to use the NINA-W102 module, which allows your Arduino to connect to the Internet, either as a server accepting incoming connections or a client making outgoing ones.

ArduinoMqttClient

The ArduinoMqttClient library allows you to send and receive MQTT messages using Arduino. Connect to brokers, publish and subscribe to topics. A great library for devices to communicate over the Internet.

ArduinoBLE

The ArduinoBLE library is designed for Arduino boards that have hardware enabled for Bluetooth® Low Energy and Bluetooth® 4.0 and above.

Arduino Basics

Built-in Examples

Built-in Examples are sketches included in the Arduino IDE and demonstrate all basic Arduino commands.

Learn

Discover interesting articles, principles and techniques related to the Arduino ecosystem.

Language References

Arduino programming language can be divided in three main parts: functions, values (variables and constants), and structure.

Tutorials

Debugging SAM-Based Arduino® Boards with Atmel-ICE

Learn how to debug SAM-based Arduino boards using the Atmel-ICE debugger and the Arduino IDE 2

IDE 2

Debugging

Debugger

Atmel-ICE

Accessing the Built-in RGB LED on the MKR WiFi 1010

In this tutorial, we are going to find out how to control the MKR WiFi 1010's built-in RGB LED. This component is a really good tool for any type of development: we can use it to prototype a smart light, or perhaps use it as a feedback component.

RGB

How to Connect Sensors to the MKR WiFi 1010

Learn how to connect different types of sensors to the MKR WiFi 1010 board.

I2C

Digital Sensors

Analog Sensors

Connecting MKR WiFi 1010 to a Wi-Fi Network

Learn how to program your board to connect to a Wi-Fi network.

IoT

Wi-Fi

MKR WiFi 1010 Bluetooth® Low Energy

Learn how to access your board from your phone via Bluetooth®.