MKR WAN 1310
The Arduino MKR WAN 1310 provides a practical and cost effective solution to add LoRa® connectivity to projects requiring low power. This open source board can connect to the Arduino IoT Cloud, your own LoRa® network using the Arduino LoRa® PRO Gateway, existing LoRaWAN® infrastructure like The Things Network, or even other boards using the direct connectivity mode.
Use LoRaWAN® in remote places to send data to nearby gateways connected to the TTS service, which in turn forwards the data to the Arduino IoT Cloud.
Use the LoRa® wireless protocol to implement your own networks, or connect to various LoRaWAN® networks, such as The Things Network.
Set up two Arduino MKR WAn 1300 to host a remote LED control. Learn more about board-to-board communication and using LoRa® in your projects.
Learn how to connect two boards using LoRa®, and how to control an LED remotely from another board.
Learn how to use the Serial Monitor to send messages between two MKR WAN 1300 boards using LoRa® technology.
Learn how to setup a continuous stream of data between two devices using LoRa® technology.
Learn how to send environmental data with LoRa® using two MKR WAN 1310 and a MKR ENV shield.
Learn how to set up specific LoRaWAN® regional parameters in the LoRa® module of the Arduino® MKR WAN 1310 board using the Arduino MKRWAN library.
Examples for the MKRWAN library, which is used to communicate with the LoRa® module onboard the MKR WAN 1300/1310 boards.
Learn how to set up an account on The Things Network (TTN) and test if your board can connect to it.
Learn how to record GPS data and send it using LoRa® technology, using two MKR WAN 1310s and a MKR GPS shield.
Interact with the schematics, the PCB and a 3D model of the product.
A diagram showing the functions and the arrangement of the pins on your product.